Goto Section: 90.207 | 90.210 | Table of Contents
FCC 90.209
Revised as of October 1, 2006
Goto Year:2005 |
2007
Sec. 90.209 Bandwidth limitations.
(a) Each authorization issued to a station licensed under this part will
show an emission designator representing the class of emission authorized.
The designator will be prefixed by a specified necessary bandwidth. This
number does not necessarily indicate the bandwidth occupied by the emission
at any instant. In those cases where Sec. 2.202 of this chapter does not provide
a formula for the computation of necessary bandwidth, the occupied
bandwidth, as defined in part 2 of this chapter, may be used in lieu of the
necessary bandwidth.
(b) The maximum authorized single channel bandwidth of emission
corresponding to the type of emission specified in Sec. 90.207 is as follows:
(1) For A1A or A1B emissions, the maximum authorized bandwidth is 0.25 kHz.
The maximum authorized bandwidth for type A3E emission is 8 kHz.
(2) For operations below 25 MHz utilizing J3E emission, the bandwidth
occupied by the emission shall not exceed 3000 Hz. The assigned frequency
will be specified in the authorization. The authorized carrier frequency
will be 1400 Hz lower in frequency than the assigned frequency. Only upper
sideband emission may be used. In the case of regularly available double
sideband radiotelephone channels, an assigned frequency for J3E emissions is
available either 1600 Hz below or 1400 Hz above the double sideband
radiotelephone assigned frequency.
(3) For all other types of emissions, the maximum authorized bandwidth shall
not be more than that normally authorized for voice operations.
(4) Where a frequency is assigned exclusively to a single licensee, more
than a single emission may be used within the authorized bandwidth. In such
cases, the frequency stability requirements of Sec. 90.213 must be met for each
emission.
(5) Unless specified elsewhere, channel spacings and bandwidths that will be
authorized in the following frequency bands are given in the following
table.
Standard Channel Spacing/Bandwidth
------------------------------------------------------------------------
Channel
Frequency band (MHz) spacing Authorized
(kHz) bandwidth (kHz)
------------------------------------------------------------------------
Below 25 \2\................................
25-50....................................... 20 20
72-76....................................... 20 20
150-174..................................... \1\7.5 \1,3\ 20/11.25/6
216-2205.................................... 6.25 20/11.25/6 \5\
220-222..................................... 5 4
406-512 \2\................................. \1\ 6.25 \13\ 20/11.25/6
806-809/851-854............................. 12.5 20
809-824/854-869............................. 25 20
896-901/935-940............................. 12.5 13.6
902-928 \4\.................................
929-930..................................... 25 20
1427-1432 \5\............................... 12.5 12.5
2450-2483.52 \2\............................
Above 2500 \2\..............................
------------------------------------------------------------------------
\1\ For stations authorized on or after August 18, 1995.
\2\ Bandwidths for radiolocation stations in the 420-450 MHz band and
for stations operating in bands subject to this footnote will be
reviewed and authorized on a case-by-case basis.
\3\ Operations using equipment using a 25 kHz bandwidth will be
authorized a 20 kHz bandwidth. Operations using equipment designed to
operate with a 12.5 kHz channel bandwidth will be authorized an 11.25
kHz bandwidth. Operations using equipment designed to operate with a
6.25 kHz channel bandwidth will be authorized a 6 kHz bandwidth. All
stations must operate on channels with a bandwidth of 12.5 kHz or less
beginning January 1, 2013, unless the operations meet the efficiency
standard of Sec. 90.203(j)(3) unless specified elsewhere.
\4\ The maximum authorized bandwidth shall be 12 MHz for non-
multilateration LMS operations in the band 909.75-921.75 MHz and 2 MHz
in the band 902.00-904.00 MHz. The maximum authorized bandwidth for
multilateration LMS operations shall be 5.75 MHz in the 904.00-909.75
MHz band; 2 MHz in the 919.75-921.75 MHz band; 5.75 MHz in the 921.75-
927.25 MHz band and its associated 927.25-927.50 MHz narrowband
forward link; and 8.00 MHz if the 919.75-921.75 MHz and 921.75-927.25
MHz bands and their associated 927.25-927.50 MHz and 927.50-927.75 MHz
narrowband forward links are aggregated.
(6)(i) Beginning January 1, 2011, no new applications for the 150–174 MHz
and/or 421–512 MHz bands will be acceptable for filing if the applicant
utilizes channels with an authorized bandwidth exceeding 11.25 kHz, unless
specified elsewhere or the operations meet the efficiency standards of
Sec. 90.203(j)(3).
(ii) Beginning January 1, 2011, no modification applications for stations in
the 150–174 MHz and/or 421–512 MHz bands that increase the station's
authorized interference contour, will be acceptable for filing if the
applicant utilizes channels with an authorized bandwidth exceeding 11.25
kHz, unless specified elsewhere or the operations meet the efficiency
standards of Sec. 90.203(j)(3). See Sec. 90.187(b)(2)(iii) and (iv) for interference
contour designations and calculations. Applications submitted pursuant to
this paragraph must comply with frequency coordination requirements of
Sec. 90.175.
[ 60 FR 37263 , July 19, 1995, as amended at 67 FR 41860 , June 20, 2002; 68 FR 42314 , July 17, 2003; 68 FR 54769 , Sept. 18, 2003; 69 FR 39867 , July 1,
2004; 69 FR 67837 , Nov. 22, 2004; 70 FR 21661 , Apr. 27, 2005; 70 FR 34693 ,
June 15, 2005]
Goto Section: 90.207 | 90.210
Goto Year: 2005 |
2007
CiteFind - See documents on FCC website that
cite this rule
Want to support this service?
Thanks!
Report errors in
this rule. Since these rules are converted to HTML by machine, it's possible errors have been made. Please
help us improve these rules by clicking the Report FCC Rule Errors link to report an error.
hallikainen.com
Helping make public information public