Goto Section: 87.131 | 87.135 | Table of Contents
FCC 87.133
Revised as of October 1, 2006
Goto Year:2005 |
2007
Sec. 87.133 Frequency stability.
(a) Except as provided in paragraphs (c), (d), and (f) of this section, the
carrier frequency of each station must be maintained within these
tolerances:
------------------------------------------------------------------------
Frequency band (lower limit exclusive,
upper limit inclusive), and categories Tolerance Tolerance \2\
of stations \1\
------------------------------------------------------------------------
(1) Band-9 to 535 kHz:
Aeronautical stations................ 100 100
Aircraft stations.................... 200 100
Survival craft stations on 500 kHz... 5,000 20 Hz \3\
Radionavigation stations............. 100 100
(2) Band-1605 to 4000 kHz:
Aeronautical fixed stations:
Power 200 W or less................ 100 100 \8\
Power above 200 W.................. 50 50 \8\
Aeronautical stations:
Power 200 W or less................ 100 \7\ 100 \7,8\
Power above 200 W.................. 50 \7\ 50 \7,8\
Aircraft stations.................... 100 \7\ 100 \7\
Survival craft stations on 2182 kHz.. 200 20 Hz \3\
(3) Band-4 to 29.7 MHz:
Aeronautical fixed stations:
Power 500 W or less................ 50 ....................
Power above 500 W.................. 15 ....................
Single-sideband and Independent-
sideband emission:
Power 500 W or less................ 50 Hz
Power above 500 W.................. 20 Hz
Class F1B emissions.................. 10 Hz
Other classes of emission:
Power 500 W or less................ 20
Power above 500 W.................. 10
Aeronautical stations:
Power 500 W or less................ \7\ 100 100 \7\
Power above 500 W.................. \7\ 50 50 \7\
Aircraft stations.................... \7\ 100 100 \7\
Survival craft stations on 8364 kHz.. 200 50 Hz \3\
(4) Band-29.7 to 100 MHz:
Aeronautical fixed stations:
Power 200 W or less................ 50 ....................
Power above 200 W.................. 30 ....................
Power 50 W or less................. 30
Power above 50 W................... 20
Operational fixed stations:
73-74.6 MHz (Power 50 W or less)... 50 30
73-74.6 MHz (Power above 50 W)..... 20 20
72-73.0 MHz and 75.4-76.0 MHz...... 5 5
Radionavigation stations............. 100 50
(5) Band-108 to 137 MHz:
Aeronautical stations.............. \4\ 50 \12\ 20
Emergency locator transmitter test 50 50
stations.
Survival craft stations on 121.5 MHz. 50 50
Emergency locator stations........... 50 50
Aircraft and other mobile stations \5\ 50 \13\ 30
in the Aviation Services.
Radionavigation stations............. 20 20
Differential GPS..................... ......... 2
(6) Band-137 to 470MHz:
Aeronautical stations................ 50 20
Survival craft stations on 243 MHz... 50 50
Aircraft stations.................... 50 \5\ 30 \10\
Radionavigation stations............. 50 50
Emergency locator transmitters on 406 N/A 5
MHz.
(7) Band-470 to 2450 MHz:
Aeronautical stations................ 100 20
Aircraft stations.................... 100 20
Aircraft earth station............... ......... 320 Hz \11\
Radionavigation stations:
470-960 MHz........................ 500 500
960-1215 MHz....................... 20 20
1215-2450 MHz...................... 500 500
(8) Band-2450 to 10500 MHz:
Radionavigation stations............. \6,9\ 1250 \6,9\
1250
(9) Band-10.5 GHz to 40 GHz:
Radionavigation stations............. 5000 5000
------------------------------------------------------------------------
\1\ This tolerance is the maximum permitted until January 1, 1990, for
transmitters installed before January 2, 1985, and used at the same
installation. Tolerance is indicated in parts in 10 \6\ unless shown
as Hertz (Hz).
\2\ This tolerance is the maximum permitted after January 1, 1985 for
new and replacement transmitters and to all transmitters after January
1, 1990. Tolerance is indicated in parts in 10 \6\ unless shown as
Hertz (Hz).
\3\ For transmitters first approved after November 30, 1977.
\4\ The tolerance for transmitters approved between January 1, 1966, and
January 1, 1974, is 30 parts in 10 \6\. The tolerance for transmitters
approved after January 1, 1974, and stations using offset carrier
techniques is 20 parts in 10 \6\.
\5\ The tolerance for transmitters approved after January 1, 1974, is 30
parts in 10 \6\.
\6\ In the 5000 to 5250 MHz band, the FAA requires a tolerance of
±10 kHz for Microwave Landing System stations which are to be a
part of the National Airspace System (FAR 171).
\7\ For single-sideband transmitters operating in the frequency bands
1605-4000 kHz and 4-29.7 MHz which are allocated exclusively to the
Aeronautical Mobile (R) Service, the tolerance is: Aeronautical
stations, 10 Hz; aircraft stations, 20 Hz.
\8\ For single-sideband radiotelephone transmitters the tolerance is: In
the bands 1605-4000 kHz and 4-29.7 MHz for peak envelope powers of 200
W or less and 500 W or less, respectively, 50 Hz; in the bands 1605-
4000 kHz and 4-29.7 MHz for peak envelope powers above 200 W and 500
W, respectively, 20 Hz.
\9\ Where specific frequencies are not assigned to radar stations, the
bandwidth occupied by the emissions of such stations must be
maintained within the band allocated to the service and the indicated
tolerance does not apply.
\10\ Until January 1, 1997, the maximum frequency tolerance for
transmitters with 50 kHz channel spacing installed before January 2,
1985, is 50 parts in 10 \6\.
\11\ For purposes of certification, a tolerance of 160 Hz applies to the
reference oscillator of the AES transmitter. This is a bench test.
\12\ For emissions G1D and G7D, the tolerance is 2 parts per 10\6\.
\13\ For emissions G1D and G7D, the tolerance is 5 parts per 10\6\.
(b) The power shown in paragraph (a) of this section is the peak envelope
power for single-sideband transmitters and the mean power for all other
transmitters.
(c) For single-sideband transmitters, the tolerance is:
(1) All aeronautical stations on land—10 Hz.
(2) All aircraft stations—20 Hz.
(d) For radar transmitters, except non-pulse signal radio altimeters, the
frequency at which maximum emission occurs must be within the authorized
frequency band and must not be closer than 1.5/T MHz to the upper and lower
limits of the authorized bandwidth, where T is the pulse duration in
microseconds.
(e) The Commission may authorize tolerances other than those specified in
this section upon a satisfactory showing of need.
(f) The carrier frequency tolerance of transmitters operating in the
1435–1535 MHz and 2310–2390 MHz bands manufactured before January 2, 1985,
is 0.003 percent. The carrier frequency tolerance of transmitters operating
in the 1435–1535 MHz and 2310–2390 MHz bands manufactured after January 1,
1985, is 0.002 percent. After January 1, 1990, the carrier frequency
tolerance of all transmitters operating in the 1435–1535 MHz and 2310–2390
MHz bands is 0.002 percent.
[ 53 FR 28940 , Aug. 1, 1988, as amended at 56 FR 38084 , Aug. 12, 1991; 57 FR 45749 , Oct. 5, 1992; 58 FR 31027 , May 26, 1993; 63 FR 36607 , July 7, 1998;
64 FR 27474 , May 20, 1999; 66 FR 26799 , May 15, 2001; 69 FR 32880 , June 14,
2004]
Goto Section: 87.131 | 87.135
Goto Year: 2005 |
2007
CiteFind - See documents on FCC website that
cite this rule
Want to support this service?
Thanks!
Report errors in
this rule. Since these rules are converted to HTML by machine, it's possible errors have been made. Please
help us improve these rules by clicking the Report FCC Rule Errors link to report an error.
hallikainen.com
Helping make public information public