Goto Section: 80.292 | 80.301 | Table of Contents
FCC 80.293
Revised as of October 1, 2006
Goto Year:2005 |
2007
Sec. 80.293 Check bearings by authorized ship personnel.
The requirement for calibration by check bearings is met if:
(a) The required verification by check bearings are made not more than 90
days prior to the date of the annual detailed inspection of the
radiotelegraph station;
(b) The verification consists of a comparison of simultaneous visual and
radio direction finder bearings. At least one comparison bearing must be
taken in each quadrant, within plus or minus 20 degrees from the following
bearings relative to the ship's heading: 45 degrees; 135 degrees; 225
degrees; 315 degrees;
(c) The verification shows the visual bearing relative to the ship's heading
and the difference between the visual and radio direction finder bearing,
and the date each check bearing is taken.
[ 51 FR 31213 , Sept. 2, 1986. Redesignated at 68 FR 46973 , Aug. 7, 2003]
Subpart G—Safety Watch Requirements and Procedures
Coast Station Safety Watches
Goto Section: 80.292 | 80.301
Goto Year: 2005 |
2007
CiteFind - See documents on FCC website that
cite this rule
Want to support this service?
Thanks!
Report errors in
this rule. Since these rules are converted to HTML by machine, it's possible errors have been made. Please
help us improve these rules by clicking the Report FCC Rule Errors link to report an error.
hallikainen.com
Helping make public information public