Goto Section: 80.207 | 80.211 | Table of Contents
FCC 80.209
Revised as of October 1, 2006
Goto Year:2005 |
2007
Sec. 80.209 Transmitter frequency tolerances.
(a) The frequency tolerance requirements applicable to transmitters in the
maritime services are shown in the following table. Tolerances are given as
parts in 10 ^6 unless shown in Hz.
------------------------------------------------------------------------
Frequency bands and categories of stations Tolerances \1\
------------------------------------------------------------------------
(1) Band 100-525 kHz:
(i) Coast stations:
For single sideband emissions......... 20 Hz.
For transmitters with narrow-band 10 Hz \2\
direct printing and data emissions.
For transmitters with digital 10 Hz.
selective calling emissions.
For all other emissions............... 100.
(ii) Ship stations:
For transmitters with narrow-band 20 Hz.
direct printing and data emissions.
For transmitters with digital 10 Hz \2\
selective calling emissions.
For all other transmitters............ 10 Hz.
(iii) Ship stations for emergency only:
For all emissions..................... 20 Hz.
(iv) Survival craft stations:
For all emissions..................... 20 Hz.
(v) Radiodetermination stations:
For all emissions..................... 100.
(2) Band 1600-4000 kHz:
(i) Coast stations and Alaska fixed
stations:
For single sideband and facsimile..... 20 Hz.
For narrow-band direct printing and 10 Hz.\2\
data emissions.
For transmitters with digital 10 Hz.\2\
selective calling emissions.
For all other emissions............... 50 Hz.
(ii) Ship stations:
For transmitters with narrow-band 10 Hz.\2\
direct printing and data emissions.
For transmitters with digital 10 Hz.\3\
selective calling emissions.
For all other transmitters............ 20 Hz.
(iii) Survival craft stations: 20 Hz.
(iv) Radiodetermination stations:
With power 200W or less............... 20.
With power above 200W................. 10.
(3) Band 4000-27500 kHz:
(i) Coast stations and Alaska fixed
stations:
For single sideband and facsimile 20 Hz.
emissions.
For narrow-band direct printing and 10 Hz.\2\
data emissions.
For digital selective calling 10 Hz.
emissions.
For Morse telegraphy emissions........ 10.
For all other emissions............... 15 Hz.
(ii) Ship stations:
For transmitters with narrow-band 10 Hz.\2\
direct printing and data emissions.
For transmitters with digital 10 Hz.\3\
selective calling emissions.
For all other transmitters............ 20 Hz.
(iii) Survival craft stations: 50 Hz.
(4) Band 72-76 MHz:
(i) Fixed stations:
Operating in the 72.0-73.0 and 75.4- 5.
76.0 MHz bands.
Operating in the 73.74.6 MHz band..... 50.
(5) Band 156-162 MHz:
(i) Coast stations:
For carriers licensed to operate with
a carrier power:
Below 3 watts..................... 10.
3 to 100 watts.................... 5.\7\
(ii) Ship stations........................ 10.\4\
(iii) Survival craft stations operating on 50.
121.500 MHz.
(iv) EPIRBs:
Operating on 121.500 and 243.000 MHz.. 50.
Operating on 156.750 and 156.800 10.
MHz.\6\.
(6) Band 216-220 MHz:
(i) Coast stations:
For all emissions..................... 5.
(ii) Ship stations:
For all emissions..................... 5.
(7) Band 400-466 MHz:
(i) EPIRBs operating on 406-406.1 MHz..... 5.
(ii) On-board stations.................... 5.
(iii) Radiolocation and telecommand 5.
stations..
(8) Band 1626.5-1646.5 MHz:
(i) Ship earth stations................... 5.
------------------------------------------------------------------------
\1\ Transmitters authorized prior to January 2, 1990, with frequency
tolerances equal to or better than those required after this date will
continue to be authorized in the maritime services provided they
retain approval and comply with the applicable standards in this part.
\2\ The frequency tolerance for narrow-band direct printing and data
transmitters installed before January 2, 1992, is 15 Hz for coast
stations and 20 Hz for ship stations. The frequency tolerance for
narrow-band direct printing and data transmitters approved or
installed after January 1, 1992, is 10 Hz.
\3\ [Reserved].
\4\ For transmitters in the radiolocation and associated telecommand
service operating on 154.584 MHz, 159.480 MHz, 160.725 MHz and 160.785
MHz the frequency tolerance is 15 parts in 10 \6\.
\5\ [Reserved].
\6\ Class C EPIRB stations may not be used after February 1, 1999.
\7\ For transmitters operated at private coast stations with antenna
heights less than 6 meters (20 feet) above ground and output power of
25 watts or less the frequency tolerance is 10 parts in 10 \6\.
(b) When pulse modulation is used in land and ship radar stations operating
in the bands above 2.4 GHz the frequency at which maximum emission occurs
must be within the authorized bandwidth and must not be closer than 1.5/T
MHz to the upper and lower limits of the authorized bandwidth where âTâ is
the pulse duration in microseconds. In the band 14.00â14.05 GHz the center
frequency must not vary more than 10 MHz from 14.025 GHz.
(c) For stations in the maritime radiodetermination service, other than ship
radar stations, the authorized frequency tolerance will be specified on the
license when it is not specified in this part.
[ 51 FR 31213 , Sept. 2, 1986, as amended at 52 FR 7418 , Mar. 11, 1987; 53 FR 37308 , Sept. 26, 1988; 54 FR 49994 , Dec. 4, 1989; 57 FR 26778 , June 16,
1992; 58 FR 33344 , June 17, 1993; 62 FR 40306 , July 28, 1997; 63 FR 36606 ,
July 7, 1998; 68 FR 46964 , Aug. 7, 2003]
Goto Section: 80.207 | 80.211
Goto Year: 2005 |
2007
CiteFind - See documents on FCC website that
cite this rule
Want to support this service?
Thanks!
Report errors in
this rule. Since these rules are converted to HTML by machine, it's possible errors have been made. Please
help us improve these rules by clicking the Report FCC Rule Errors link to report an error.
hallikainen.com
Helping make public information public